Shark Vacuum Brush Roll Indicator Light Not On

Last Updated on October 6, 2019

Nowadays, modern technological appliances have been more and more developing. Therefore, your household chores become easier. The Shark vacuum cleaner is considered as one of the major cleaning appliances many people use. It is a great way to perform our cleaning chores.

However, it still poses some challenges for its users. In this article, we will discuss ‘‘the shark vacuum brush roll indicator light not on’’. This is actually one of the most frustrating issues when it comes to the Shark vacuum cleaner. Keep reading this article, we will give you some methods and tips for this issue.

The Way the Brush Roll Indicator Light Works

This vacuum cleaner is actually one of the most high-powered vacuums on the market these days. They are famous for their formidable cleaning capacity. And, its efficient brush roll is known as the key weapon of the Shark vacuum cleaner.

It also is called an agitator. This brush roll is plastic or metal cylinders. It’s built with bristles. It is able to pick up dirt from the surface thanks to the rotation at high speed.

The brush roll of the Shark vacuum is made with the higher capacity, so it is able to invade the carpet deeper. There is a separate belt that is to activate the brush roll.

The indicator is installed by the manufactures in order to let users determine if the brush roll is working right or not. The indicator light is green when it’s working properly. On the contrary, if the light is red, it means that it is jammed or indicates the shark vacuum overheating.

In some cases, the lights are blinking. And, it’s unnerving for the users. However, this is not a problem because it just shows that the battery charge is running low. Keep in mind that all of the shark vacuum models on the market have their operational manual.

For examples, if you choose to use a Shark rotator vacuum model, you will want to refer to the Shark Rotator Vacuum Manual for all the info related to the vacuum such as light meanings and the ways to deal with common problems.

Why Is the Shark Vacuum Brush Roll Indicator Light Not On?

In order to handle this issue effectively, we need to trace back to the root of the problem to determine the reason why the Shark vacuum brush roll indicator light is not on. Here are our steps you should know to decode the cause, handle the problem, and enjoy your Shark cleaning again.

The vacuum is not turned on properly

This is actually a common reason many users may experience. Then, they can determine if the shark vacuum is malfunctioning. Sometimes, this issue may be caused by not turning on the vacuum cleaner properly.

For example, it occurs when you don’t plug the vacuum cleaner properly. Therefore, it’s important to plug it into the outlet completely. Also, make sure the On Switch is on.

Each shark vacuum cleaner comes with two power switch modes. They are for two respective cleaning modes, including the brush roll mode and the suction mode. In order to activate the brush roll mode, you have to keep the switch in the proper mode.

How to fix

You need to check carefully if the device is plugged incorrectly or not. At the same time, see the vacuum switch settings as well. If you get any problems with starting or restarting the shark vacuum, you should consider a shark vacuum motor reset.

To reset the shark vacuum, you need to place the Power button to the On-Off position first. Then, turn off the vacuum. If necessary, you may have to clear the hose and filter. You just should plug the vacuum in again once it becomes cool completely. After that, turn on the power switch.

In order to clean the filters, you need to remove the HEPA filters. Then get rid of dust by tapping them against a trash bin. Use the lukewarm water to wash the filter. You can do this by hands. Next, dry the filters. Once they dry completely, you can put them back into the vacuum cleaner.

Loosely attached nozzle

The nozzle may be another potential reason for the shark vacuum brush roll indicator light not on. The fact is that only when you attach the brush roll properly, it can function. If the brush roll is loosely attached, the brush roll can’t get the power from the nozzle. Most users often overlook this problem.

How to fix

You need to check if the nozzle is attached carefully. Also, it’s important to clear out any blockage in order to maintain the connection when needed.

The brush roll is blocked

Sometimes the indicator light isn’t red when the brush roll is clogged or jammed. Instead, not all the time it turns on.

How to fix

You have to clear the blockage. At the same time, don’t forget to clean the brush roll regularly. This purposes to eliminate built-up dirt and debris. In order to clear the blockage, the vacuum needs to be unplugged first. Access the roll in order to eliminate everything that prevents the movement of the brush roll.

The belt is damaged

If all the reasons are not the real reasons. The last potential cause for our shark vacuum brush roll indicator light not on is due to the broken driving belt of the brush roll. For this reason, you need to call the manufacturer in order to get a repair service or replacement.

Conclusion

One of the most fantastic cleaning appliances out there is the Shark vacuum cleaner. It deserves all of the positive reviews for its powerful cleaning capacity. Although it still comes with a few problems here, we can deal with its problems effectively as long as you understand the way it works. Hopefully, our tips today are helpful for you, and you will enjoy this guide.